Practical Handbook of Thermal Fluid Science is an essential guide for engineering students to practical experiments and methods in fluid mechanics. It presents the topic of practical fluid physics in a simple, clear manner by introducing the fundamentals of carrying out experiments and operational analysis of systems that are based on fluid flow. The information enables readers to relate principles in thermal fluid science with the real world operation of important instruments that greatly impact our daily life, such as power generators, air conditioners, refrigerators, engines, flow meters, airplanes, among others. Key Features: - A simple organized chapter layout that focuses on fundamental and practical information about thermal fluid science experiments and equipment - Provides an introduction to essential knowledge for analysis and evaluation of practical systems and major inventions - Presents information about analysis of operating data for power plant efficiency - Detailed chapters for studying and testing wind tunnels, sphere heating/cooling, pipe flow, engines, and refrigerators/heat pumps are provided - Experimental data of Venturi and orifice plate flow meters are provided to show step by step calibration and experimentation. - Presents information on report preparation - Includes multiple appendices to consolidate practical information for readers for quick reference.

This volume describes the advanced research on the behavior of electrons in ionized atoms and molecules. Readers will learn about relevant techniques used and experimental results for different electron and molecular theories. The information presented in the book is useful for scholars and researchers involved in nuclear and atomic physics programs. Topics covered in the volume include: -Ionization experiments -Kinetic energy studies of photoexcited carbon dichloride and tetrachloride molecules -Selective excision of biomolecules in electron transfer experiments -Particle and antiparticle collisions with rare gases -Multiple scattering in electron Rutherford scattering spectroscopy -Four-body effects in the 6He58 +58Ni scattering -Twin atoms from doubly excited states of the hydrogen molecule

This book is a compilation of the latest theoretical methods for treating models in nuclear reactions. Initial chapters in this volume explain different aspects of time-dependent nuclear density functional theory, such as numerical calculations, density constrained models, multinucleon transfer reactions, and superfluid time dependent density functional theory. In addition, the volume also presents chapters covering other topics in nuclear physics, such as quantum molecular dynamics, cluster models in stable and unstable nuclei, chain structure theory in light nuclei, many-body systems and more. The volume is intended as a guidebook for graduate students and researchers to understand recent theories used in applied nuclear particle physics and astrology.

Classical field theory is employed by physicists to describe a wide variety of physical phenomena. These include electromagnetism, fluid dynamics, gravitation and quantum mechanics. The central entity of field theory is the field which is usually a multi component function of space and time. These multi component functions are usually grouped together as vector fields as in the case in electromagnetic theory and fluid dynamics, in other cases they are grouped as tensors as in theories of gravitation and yet in other cases they are grouped as complex functions as in the case of quantum mechanics. In order to know the value of the field one needs to solve a set of coupled partial differential equations with given boundary and initial conditions. The book covers a selection of recent advances in classical field theory involving electromagnetism, fluid dynamics, gravitation and quantum mechanics. Advances in Classical Field Theory will benefit readers by saving them the effort to read through numerous journal articles which would be needed to obtain a coherent picture of classical field theory otherwise. This eBook is unique in its aim and scope and is not similar to any existing publication.

A Quantum system can be viewed as a larger closed system comprising of two components: an open quantum system and its surrounding environment. These two components interact with each other, and in the realm of theoretical physics, this interaction cannot be neglected. This eBook explains mathematical and statistical concepts essential for describing a realistic quantum system by presenting recent contributions in this field. The book commences by explaining of the basics of quantum mechanics, statistical physics, and physics of open quantum systems. Detailed methods of deriving theoretical equations with explicit analytical coefficients with respect to open quantum systems are also explained. The book concludes with the study of a quantum heat converter in the framework of an all-microscopic theory involving fermions, photons, and phonons. Readers of this book will gain a better understanding on the following topics: • Quantum mechanics including the Boson and Fermion states, Fermi-Dirac and Bose-Einstein statistics, spin-statistics relation, many-body systems of Bosons and Fermions, the Fermi-Dirac integrals of the Fermion state densities, and transport phenomena in semiconductors • Dissipative dynamics and quantum systems such as friction, diffusion, friction-diffusion relation, mobility, occupation probability dynamics, damping, spectral width, correlation and autocorrelation, memory, stability, bifurcation, self-organization, and chaos • Lindblad’s theory of open quantum systems through the work of Alicki and Lendi • Quantum tunneling as an interaction with a system. • Optical bistability, including the fundamental contributions of Carmichael, McCall, and Bonifacio. • Master equations based on the microscopic theory of Ford, Lewis, and O’Connell. • Field propagation in a semiconductor structure • Coherent light propagation in the framework of a microscopic model including the refractive index and the Raman frequency shift. • Heat conversion in the framework of an all-microscopic model of open queantum systems • Entropy dynamics in a matter field system.

The second volume of this book series presents a foundation for describing electron-field interactions, the basic elements involved in open quantum theory, the dissipative couplings of the active elements, the quantum injection dot electrons and coherent electromagnetic fields produced by crystal lattice vibrations. A microscopic description of the systems of interest is used to explain a number of structural models that describe electron arrangement and mechanics in such systems. The explanation of these models depends on a number of numerical parameters and calculations which have been explicitly discussed in detail. Readers will gain a better understanding of open quantum systems and energy conversion in semiconductor devices. Theoretical calculations presented in this book can also be compared with experimental data from prior experiments. The volume is also supplemented by an adequate bibliography which provides useful references. This book is a handy text on advanced quantum theory for advanced physics and electronics students and researchers.

This volume presents a clear understanding of the quantum mechanics of particles with reference to the current understanding of theory of relativity, gravitation, and electromagnetism, including essential phenomena as spin, the graviton spin, black holes, and the quantum particle states in the extreme conditions of a black hole formation, and of the Schwarzschild boundary. The reader is introduced to the recent theory of the quantum particle dynamics as a distribution of matter propagating with the velocity of the waves. The text describes this distribution by a Fourier space-time series expansion, which we call the wave function. The subsequent chapters delve into the mechanics of quantum particles in a gravitational field, charged particles in a gravitational field and finally, the least action and matter-field dynamics in a gravitational field. The book also explains important rules in quantum mechanics such as the mass quantization rule, Dirac’s formulation of the general theory of relativity, electromagnetic field theory, quantum particle interactions and more. The volume serves as a concise introduction to the complex topic of quantum particle mechanics for scholars involved in advanced physics courses.

Progress in Computational Physics is a new e-book series devoted to recent research trends in computational physics. It contains chapters contributed by outstanding experts of modeling of physical problems. The series focuses on interdisciplinary computational perspectives of current physical challenges, new numerical techniques for the solution of mathematical wave equations and describes certain real-world applications. With the help of powerful computers and sophisticated methods of numerical mathematics it is possible to simulate many ultramodern devices, e.g. photonic crystals structures, semiconductor nanostructures or fuel cell stacks devices, thus preventing expensive and longstanding design and optimization in the laboratories. In this book series, research manuscripts are shortened as single chapters and focus on one hot topic per volume. Engineers, physicists, meteorologists, etc. and applied mathematicians can benefit from the series content. Readers will get a deep and active insight into state-of-the art modeling and simulation techniques of ultra-modern devices and problems. Periodic structure problems arise quite often in many modern application areas like semiconductor nanostructures (e.g. quantum dots and nanocrystals), semiconductor superlattices, photonic crystals structures, meta materials or Bragg gratings of surface plasmon polariton waveguides. This first volume treats both mathematical analysis of periodic structure problems and state-of-the art numerical techniques, such as frequency domain methods, beam propagation methods and eigenmode expansion methods. Several chapters are devoted to concrete applications of periodic media simulation. The book is a useful resource for individuals interested in complex wave mechanics of unique physical structures.

Progress in Computational Physics is a new e-book series devoted to recent research trends in computational physics. It contains chapters contributed by outstanding experts of modeling of physical problems. The series focuses on interdisciplinary computational perspectives of current physical challenges, new numerical techniques for the solution of mathematical wave equations and describes certain real-world applications. With the help of powerful computers and sophisticated methods of numerical mathematics it is possible to simulate many ultramodern devices, e.g. photonic crystals structures, semiconductor nanostructures or fuel cell stacks devices, thus preventing expensive and longstanding design and optimization in the laboratories. In this book series, research manuscripts are shortened as single chapters and focus on one hot topic per volume. Engineers, physicists, meteorologists, etc. and applied mathematicians can benefit from the series content. Readers will get a deep and active insight into state-of-the art modeling and simulation techniques of ultra-modern devices and problems. The second volume of this series, titled Coupled Fluid Flow in Energy, Biology and Environmental Research covers the following scientific topics in the fields of modeling, numerical methods and applications: • Coupling between free and porous media flow • Coupling of flow and transport models • Coupling of atmospheric and ground water models This second volume contains both, the mathematical analysis of the coupling between fluid flow and porous media flow and state-of-the art numerical techniques, like tailor-made finite element and finite volume methods. Finally, readers will come across articles devoted to concrete applications of these models in the field of energy, biology and environmental research.

Turbulent Flow and Boundary Layer Theory: Selected Topics and Solved Problems explains fundamental concepts of turbulent flow with boundary layer analysis. A general introduction to turbulent flow familiarizes the reader with the mechanics of turbulence in fluid flow in both nature and engineering applications. The book also explains related concepts including transient flow, methods for controlling transients, turbulent models and dynamic equations for unsteady flow through closed conduits. The contents of the book are designed to help both students and teachers in carrying out turbulent flow analysis and solving problems in engineering and hydraulic applications. Key Features - all the basic concepts in turbulent flow are clearly identified and presented in a simple manner with illustrative and practical examples. - includes a self-contained approach to the subject, indicating prerequisite materials and information needed from courses. - each chapter also has a set of questions and problems to test the student’s power of comprehending the topics. - provides an exhaustive appendix on interesting examples Turbulent Flow and Boundary Layer Theory: Selected Topics and Solved Problems a useful textbook for students of engineering. It also serves as a quick reference for professionals, researchers and project consultants involved with processes that require turbulent flow and boundary layer methods analysis.